Pricing does not include applicable freight, setup, or documentation costs.

9999 Honda Power Equipment WB30 Water Pump

$799.00

$799.00

Overview

New/Used New
Usage0 Miles
Availability In Stock
LocationNaults Powersports - Manchester
Primary ColorRED
Stock # HP5072189
VIN WACT-5072189
Condition Excellent

Product Features

Description

Key Features
  • General purpose, centrifugal 3" pump
  • Easy starting Honda OHV commercial engine
  • 290 gal./min. capacity
  • Silicon carbide mechanical seal
  • Cast iron volute and impeller
Features
  • Easy starting Honda OHV commercial engine: The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.
  • Durable silicon carbide mechanical seal: The WB30 features abrasion-resistant silicone-carbide seals for extended wear.
  • 4 vane high efficiency impeller: The WB20's exclusive, Honda-designed 4 vane impeller offers improved performance and high efficiency.
  • Cast iron volute: The rigid-mount cast iron volute reduces case wear, increasing the life of the pump.
  • Heavy duty full frame protection: Protects the pump, while offering a convenient tie down location for transport.
  • Isolation mounted engine and pump: High performance mounts minimize vibration, keeping the pump from “walking" away or “burying" itself in soft soil conditions. The reduced vibration also reduces wear on components, increasing the pump's durability.
  • Protected by Honda Oil Alert®: Protects the pump by shutting the engine off when low oil is detected.
  • 3 year residential/commercial warranty: You can rest easy, knowing your pump is covered from top to bottom for 3 full years.
  • Large strainer: The strainer allows up to 8 mm (5/16 in.) solids to pass through, helping to prevent clogging.
Specifications
  • Engine: GX160
  • Displacement: 163cc
  • Bore and stroke: 2.7 in. x 1.8 in.
  • Compression Ratio: 9.0:1
  • Oil Alert: Std
  • Pump type: Centrifugal, Self-priming
  • Volute: Rigid Mounted Cast Iron
  • Impeller: 4 Vane Cast Iron
  • Mechanical Seal (Pump case / impeller): Silicon Carbide/Silicon Carbide
  • Priming time: 150 sec @16.4 ft.
  • Drive system: Direct
  • Discharge capacity: 290 gpm
  • Suction port diameter: 3 in. NPT
  • Discharge port diameter: 3 in. NPT
  • Total head lift: 85 ft.
  • Suction head lift: 25 ft.
  • Maximum pressure: 37 psi
  • Solids handling: N/A
  • Dimensions (LxWxH): 20.1 in.x 15.2 in. x 17.9 in.
  • Dry weight: 57 lb.
  • Fuel Capacity: 0.82 gal.
  • Run Time @ Max Discharge: 1.9 hr
  • Strainer Part #: 78325-YG4-000
  • Residential Warranty: 3 years
  • Commercial Warranty: 3 years
Accessories
  • A wide variety of hose kits, couplers, adaptors, and other accessories are available.
NOTES:
WARNING: This product can expose you to chemicals including soots, tars, and mineral oils, which are known to the State of California to cause cancer, and carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Engine

Engine Manufacturer Honda
Engine Displacement 163cc
Bore and Stroke 2.7 in. x 1.8 in.

General

Pump Style Centrifugal, Self-priming
Impeller 4 Vane Cast Iron
Drive System Direct
Discharge Capacity 290 gpm
Discharge Port Diameter 3 in. NPT
Suction Diameter 3 in. NPT
Head Lift 85 ft.
Suction Head Lift 25 ft.
Max Pressure 37 psi
Weight 57 lb.

Shopping Tools